Transmission & Distribution Products.
Crossarms and braces, pole-line hardware, equipment and meter mounts, conductor supports, substation connectors, and Cooper Power series line apparatus — the overhead and underground line products that carry and control power from the substation to the load.
- Coverage
- MV / HV
- Manufacturers
- 8
- Product families
- 6
Line construction standards.
Overhead and underground line construction in the United States is governed by the National Electrical Safety Code. Connectors used on utility line conductors are tested to the ANSI C119 series.
-
NESC (IEEE C2)
The National Electrical Safety Code — practical safeguarding of persons during the installation, operation, and maintenance of electric supply stations, overhead supply and communication lines, and underground or buried supply and communication cables. The governing code for line construction.
-
ANSI C119.4
Electric connectors for aluminum-to-aluminum, aluminum-to-copper, and copper-to-copper conductors on utility distribution and transmission lines — establishes the electrical and mechanical test requirements for line connectors.
-
ANSI/NEMA C29
The electrical power insulator standards family — covered under Insulators & Bushings, where distribution insulators, guy strain and HDPE insulators, and apparatus bushings are detailed.
Product families.
Crossarms & Braces
Crossarms, arms, and braces — the structural members that carry conductors and equipment on the pole. Built in fiberglass, aluminum, and apitong wood; specified by material, length, and mechanical strength rating.
Pole-Line Hardware
The brackets, clamps, bands, and fittings that assemble an overhead line — fastening arms, equipment, and supports to the structure. Specified by product family, material, and mechanical strength rating.
Equipment & Meter Mounts
Mounting brackets and platforms that land pole-mounted equipment and metering on the structure. Specified by the equipment served, the structure it mounts to, and the mechanical loading.
Conductor Supports
Supports that hold and position conductor along the run, keeping spacing and clearance consistent between structures. Specified by conductor size range and configuration.
Substation Connectors
Bolted and compression connectors that join conductor, bus, and equipment terminals in the substation — from the ABB Installation Products lines. Specified by conductor material, size range, and configuration.
Line Apparatus
Voltage regulators, reclosers, capacitors, and surge arresters for overhead and underground distribution — the Eaton Cooper Power series apparatus that regulates, protects, and sectionalizes the line. Specified by voltage class and the electrical rating of each apparatus family.
FAQ.
What are transmission and distribution products?
Transmission and distribution products are the structural hardware, conductor supports, connectors, and protective and switching apparatus that carry and control power along overhead and underground lines from the substation to the load.
The category spans crossarms and braces, pole-line hardware, equipment and meter mounts, conductor supports, substation connectors, and line apparatus such as voltage regulators, reclosers, and capacitors.
What standards govern overhead line construction?
The National Electrical Safety Code (NESC, published as IEEE C2) covers practical safeguarding of persons during the installation, operation, and maintenance of electric supply stations, overhead supply and communication lines, and underground or buried supply and communication cables.
Connectors for aluminum and copper conductors on utility distribution and transmission lines are tested to ANSI C119.4.
How are transmission and distribution structural products rated?
Structural hardware — crossarms, braces, mounts, and pole-line hardware — is rated by mechanical strength, with material and finish matched to the loading and environment.
Line apparatus carries electrical ratings: voltage class plus the regulation, interrupting, or energy-handling rating of the apparatus family. Selection depends on line voltage, span, conductor loading, and the project's mechanical-design criteria.
Does this category cover transmission or distribution voltages?
Both. The category includes medium-voltage distribution-class equipment and higher-voltage transmission-class equipment. The applicable rating is confirmed per project.
Which manufacturers does Hawk carry for transmission and distribution products?
Hawk carries transmission and distribution products from ABB, Aluma-Form, Cooper Power Systems (an Eaton company, marketed as the Eaton Cooper Power series), Eaton, G&W Electric, JST Power Equipment, Lindsey Manufacturing, and Nexans.
Does Hawk publish transmission and distribution pricing or lead times?
No. Transmission and distribution products are configured and priced per project.
Send the product family, voltage class, and structural or electrical rating through Contact — pricing and availability are confirmed once those are defined.
Sourcing line products?
Send the product family, voltage class, conductor or structural rating, and quantities — Hawk MV Supply will fill in the rest.
Transmission & distribution products across overhead and underground line construction.
Hawk MV Supply sources transmission and distribution products across overhead and underground line construction — crossarms and braces, pole-line hardware, equipment and meter mounts, conductor supports, substation connectors, and line apparatus including voltage regulators, reclosers, capacitors, and surge arresters. Line construction is governed by the National Electrical Safety Code (NESC, published as IEEE C2), which covers the installation, operation, and maintenance of electric supply stations, overhead supply lines, and underground cables; connectors for aluminum and copper conductors on utility lines are tested to ANSI C119.4. Products are specified by voltage class, product family, and the structural or electrical rating that applies to that family — mechanical strength for hardware and structures, and regulation, interrupting, or energy-handling ratings for apparatus. Exact values are confirmed per project.
Transmission and distribution products are used by utilities and by renewable generation and interconnection projects to build and maintain overhead and underground lines — carrying conductor, fastening equipment to structures, and protecting and sectionalizing circuits. Hawk carries transmission and distribution products from ABB, Aluma-Form, Cooper Power Systems (an Eaton company), Eaton, Lindsey Manufacturing, and Nexans. Brand names and logos are the property of their respective owners; product availability and exact specifications are confirmed at quote.